Ford Ranger enters a new generation and brings a huge range of upgrades to tickle the fancy of buyers, including a 3L V6 turbo diesel.
The new-look Ranger has been revealed with a bluff new look and comprehensive rebuild from top to bottom.
The fourth-generation Ranger is 50mm wider, giving it a broader stance, which is enhanced by a larger radiator grille with a horizontal bar that incorporates the Ford badge and extends across the front to the new “C-clamp” daytime running lights.
The new tailgate design features the Ranger name stamped into the metal, while the sides now have slightly more pronounced wheel arches and now feature an integrated step on either side of the rear bumper to improve access into the loadbed. LED lights are available for the first time at both ends.
The current 2.0-litre diesel engine is retained, remaining architecturally the same with only slight modifications for cooling. There will be two single-turbocharged variants and a twin-turbocharged one, the power ratings for which are still to be confirmed.
A new 3.0-litre diesel V6 has been added to the ranks, too, and while it has yet to be officially detailed, it will no doubt tout performance statistics to trump the 157kW and 498Nm currently available in today’s most powerful Ranger. A turbocharged 2.3-litre four-cylinder petrol engine will also be sold in some markets.
Ford has also confirmed that the new Ranger will be available with an electrified drivetrain, although it has offered no further details on specification or timeframe. The company will make its commercial vehicle line-up zero-emissions-capable by 2024, so a plug-in hybrid is the most likely format for the Ranger, and various reports suggest it will be based around the 2.3-litre Ecoboost engine.
New five- and six-speed manual gearboxes replace the current units, plus there’s a revised 10-speed automatic that’s lighter and has tighter ratios to improve towing capability at lower revs.
The gearshift itself is now a short-throw “e-shifter” with an electronic parking brake that will enable the Ranger to gain more driver assistance systems and semi-autonomous driving features in the future.
For the first time, Ford will offer two different versions of four-wheel drive in the Ranger: a basic system offering on-the-fly manual selection of four-wheel-drive mode and a more advanced, electronically controlled on-demand system.
A choice of body types and trim levels mirroring the current range will be available, including the Ranger Raptor performance variant and plusher models (such as the popular Wildtrak) with premium soft-touch materials inside and a 10.0-inch or 12.0-inch portrait-orientated touchscreen with the latest version of Ford’s Sync4 infotainment system.
A fully digital instrument cluster allows drivers to customise the information shown in front of them and adapts its display to suit the six new driving modes (previously only available in the Raptor). However, many of the off-roading controls are now found in the touchscreen, and there’s a dedicated screen view for off-roading that includes data on the driveline, steering angle, vehicle pitch and roll angles alongside other useful information and controls.
New exterior zone lighting covering the loadbed and surrounding area will improve the working use of the new pick-up, along with an onboard inverter in the rear with 400W of power.
Additional new features for the loadbed include clamps built into the tailgate to give you a mobile workbench for holding materials for cutting. New plastic capping on the loadbed edges will prevent damage to the body and conceals structural anchoring points for the easy attachment of canopies or covers. Moulded slots in the loadbed now also allow you to fit dividers to customise the load box.
In addition, Ford will offer around 600 official accessories from launch.
